Detailed Product Description

Equalizer feature:

Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB.Patent-pending PeakPlus Limiter threshold range from 0dBu to +24dBu(off) can transparently tame the wildest hits or the subtlest nuances of any signal.Four segment LED bargraph for BOTH Gain Reduction and Output Level.Status LEDs offer visual feedback for all settings on the front panel.

 INPUT

Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

Type: Electronically balanced/unbalanced, RF filtered

Impedance: Balanced 40k ohm, unbalanced 20k ohm

Max Input Level: >+21dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz

OUTPUTS

Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Type: Impedance-balanaced/unbalanced, RF filtered

Impedance: Balanced 200 ohm, unbalanced 100 ohm

Max Output Level: >+21dBu balanced/unbalanced into 2k or greater
>+20dBm balanced/unbalanced (into 600)

SYSTEM PERFORMANCE

Bandwidth: 20Hz to 20kHz, +/-0.5dB

Frequency Response: <10Hz to >50kHz, +0.5/-3dB

Noise Reduction In: (+/-6 and +/-12dB range):

Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range: >120dB, unweighted

Noise Reduction Out: (+/-6dB range):

Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth

Dynamic Range: >112dB, unweighted

Noise Reduction Out: (+/-12dB range):

Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range: >108dB, unweighted

THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz

Interchannel Crosstalk: <-80dB, 20Hz to 20kHz

Noise Reduction: Up to 20dB of dynamic broadband noise reduction

FUNCTION SWITCHES

Type III® NR: Activates dbx® Type III® Noise Reduction

EQ Bypass: Bypasses the Graphic Equalizer section in the signal path

Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter

Range (recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range

INDICATORS

Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB

Type III® NR Active: Yellow LED

EQ Bypass: Red LED

Clip: Red LED

Low Cut Active: Red LED

+/-6dB range: Yellow LED

+/-12dB range: Red LED

POWER SUPPLY

Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz
230VAC 50/60Hz

Power consumption: 23W

Main Connection: IEC receptacle

PHYSICAL

Dimensions: 5.25" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)

Note: Specifications subject to change without notice.